An attempt to build an RC module RIG where individual components can be replaced to change the character of the RIG.
Parts
PAN-Modul and Power-Modul
Pan module, consisting of:
2x Cfk rod ∅6x4x175 mm
2x servo mount
1x drive shaft with spacers
1x drive shaft mount
1x Gear pair, momentary 50/10 Z, m=1
4x threaded rod M4x20 mm
Power module, consisting of:
1x Forex plate 180x30x3 mm
1x I/O switch
2x battery holder
4x AAA battery
1x Reveiver HK 6TA V2
Frame parts, consisting of:
1x Forex side part 150x30x4 mm
1x Forex side part 150x30x4 mm with standard servo Hitec HS-311
Tilt module, consisting of:
1x Forex side part 50x30x4 mm with servo horn
1x Forex side part 35x30x4 mm
1x forex bottom part 130x30x4 mm
Weights
| description | weight |
|---|---|
| Standard-Servo Hitec HS-311 with 50-tooth gear | 48,4 g |
| Standard-Servo Hitec HS-311 with 10-tooth gear | 43,5 g |
| 2x Battery holder with 4 AAA cells | 54,9 g |
| Receiver HK 6TA V2 | 9 g |
| 2x Servo bracket | 4,1 g |
| Drive shaft compl. with bracket | 12,8 g |
| Frame, consisting of 2x Cfk rod 6x4x175mm, 3x Forex plate | 72,9 g |
| Tilt-Modul | 37 g |
| Small parts consisting of: 4x CfK rod 6x4x175 mm with mountings, screws, nuts, shaft, pendulum/picavet mounting | 50,45 g |
| Total weight | 333,05 g |